In One Piece
October 26, 2026

In One Piece

Most knitwear starts flat. A machine knits two-dimensional panels, and those pieces are later cut and sewn into shape. Every ORUU glove is made differently: on a Shima Seiki WHOLEGARMENT machine, which knits in three dimensions. The palm, each finger, and the thumb take shape together, as one continuous piece. The glove comes off the machine already formed. Nothing is cut. Nothing is sewn.

Fittingly, Shima Seiki began with gloves — its first fully automatic machine, built in 1964, was a glove knitting machine.

Knitting in three dimensions changes how a glove feels on the hand. With no seams, nothing presses against your fingertips. The knit stretches evenly as you move, rather than pulling at a join. And because nothing is cut, no yarn is lost to offcuts.

Everything happens in that single pass. The stripes of NIJI, the two tones of KASUMI, the nubby bouclé of MOKO — all knitted in. Even the touchscreen fingertips are knitted in at the same time, with a conductive yarn worked into the tips.

Then there is the thumb. On many gloves, the thumb is a simple tube set on the side of the hand. Ours is shaped in three dimensions, angled the way a real thumb sits: slightly forward, turned toward the palm. Hold a coffee cup or a subway pole and the glove moves with you, instead of pulling across your palm.

But the machine is only half of it. It doesn’t know what a good glove feels like. Someone has to program each style, stitch by stitch. Someone has to set the tension for each yarn, test a sample, adjust, and test again. And someone has to finish every glove, washing and shaping it until the yarn becomes soft. In Higashikagawa, that work belongs to people who have spent decades learning it.

One piece of yarn, one continuous knit, and a great deal of patience.  These are the gold standards for luxury knit gloves.